伺服型入线机

伺服型入线机

特性:

本机型为线圈与槽楔自动嵌入定子槽形中的设备;此设备能够将线圈和槽楔或线 

圈与槽中层间槽楔一次性嵌入定孑槽形中;槽楔采用步进电机送纸,线圈与槽楔采用伺服电机嵌入,配备人际界面可设定所需参数,可根据不同的电机的槽满率与线的种类设定不同的嵌入速度与送槽楔方式;转产可更换模具实现,特别适应于空调电机 

洗涤电机、压缩机电机、风扇电机、发电机电机、泵用电机等微型类感应马达。

适应内径:Φ30-Φ110mm

适应外径:≤Φ160mm

叠厚范围:10-150mm

模具行程:≤60mm

适应线品:铜线/铝线

适应槽数:8~48s|ots 

电源:380V50/60Hz3kW

重量:≈600kg

外形尺寸:1850×650×1700mm(长x宽x高)

Feature

With servo driven system, the machine is used for inserting coil and wedge into

stator slot simultaneously, the wedge feeding is to be done by steppingmotor,

different parameter could be set in human-machine interface, the speed and feeding

mode is acquirable according to different slot filling rate and different kind of wire

The machine mainly apply to air conditioner motor, washing machine motor, compression motor, fan motor, generator motor, pump motor, single and three phase induction motor, etc

Stator l D: @ 30-110mm                               Appropriate Wire: Copper Wire/Alum Wire

Stator C.D:≤160mm                                      Slot Number Range: 8-48 slots

Stack Height: 10-150mm                              Power Supply: 380V 50/60Hz 3kw

Tooling Travel:≤60mm                                  Weight: ≈600kg

                                                                      Dimension:1850×650×1700mm( LxWxH)